Classic Steel

• 

  Standard (CT-1) steel tread with closed end. Holes are pre-punched so the tread can receive optional wood tread coverings.

• 

  Curved up (CTC-2)

  steel tread with closed end. Provides that thin look. Holes are

  pre-punched so the tread can receive

  optional wood tread coverings.

• 

  Long curved (CT-4)

  steel tread with closed ends. Holes are pre-punched so the tread can receive optional wood tread coverings.

• 

  Ivy stencil (CT-5) steel tread with closed ends. Holes are pre-punched so the tread can receive optional wood tread coverings.

• 

  Code riser (CT-6) steel tread with closed ends. Code risers will maintain a space less then 4″ between treads. Holes are pre-punched so the tread can receive optional wood tread coverings.

• 

  Grated (CT-8) steel tread with closed end. Grated treads allows water, ice and snow to fall through the tread, whiling providing a unique open feel. Also available in a 3/16″ thick heavy-gauge version. (Not available in a diamond pattern)

• 

  Industrial Heavy-Gauge 3/16″ (CT-9) steel tread with rounded closed end. These treads are made with extra thick steel plates for  additional strength.

(click to enlarge) [back to top]

• 

  Diamond Pattern (CTC-1) steel tread provides a non-skid surface. (Diamond pattern on tread top only)

• 

  Solid Wood (CTC-2) tread covers in 1 1/16″or 1 3/4″ finished thickness. Treads are nosed and sanded to a fine finish. Oak, maple, cherry, mahogany, and cedar are stock woods with additional species available upon request.

• 
  Flakeboard (CTC-3) tread covers in 3/4″ thickness, ready to accept carpeting. (Carpeting not included)
• 
  Industrial Heavy-Gauge Diamond Pattern (CTC-4) 3/16″ steel tread provides a non-skid surface. (Diamond pattern surround on tread top and side)

(click to enlarge)[back to top]

• 
  Standard sleeves (CTS-1). The treads slide up and down on the center column. Each set of treads will fit a wide range of floor-to-floor heights.
• 
  Continuous sleeves (CTS-2). Are custom cut to your riser height. This feature provides a smooth center column appearance. (Please furnish your exact floor-to-floor height)
• 
• (click to enlarge) [back to top]

• 
  CBT-S. Standard Baluster Tip.
  The baluster tip is formed and adjustable to maintain a smooth transition to the handrail.
• (click to enlarge)
  Curved up (CTC-2)
  Steel tread with closed end. Provides that thin look
• >
  CB-1. Classic Steel Baluster 1˝ round, heavy wall tubing.
  CB-2. Cage Steel Baluster 1˝ round, heavy wall tubing.
  CB-3. Single Ring Steel Baluster 1˝ round, heavy wall tubing.
  CB-4. Double Ring Steel Baluster 1˝ round, heavy wall tubing.
  CB-5. Scroll Steel Baluster 1˝ round, heavy wall tubing.

(click to enlarge) [back to top]

• 
  Standard black vinyl (CH-1) handrail – 1 1/2″ O.D. with end caps.
  Pre-formed aluminum (CH-2) handrail -1 1/2″ O.D. with dome end caps. This handrail may be left in it’s natural aluminum finish or painted the same color as the stair.
  Pre-formed solid polished brass (CH-3) handrail -
  1 1/2″ O.D., with dome end caps.
  Solid Wood (CH-4) handrails. All wooden handrails are manufactured to your individual specifications and shipped in one piece. (Oak, Maple, Cherry, Mahogany, Cedar are stock woods with additional species available upon request.)
  Standard Shape (CH-4A) handrail – 2″ tall.
• Standard Shape (CH-4B) handrail – 3″ tall.
  Bead and Finger Groove (CH-4c) handrail – 3″ tall.

(click to enlarge) [back to top]

• 
  1. Standard vinyl cap
  2. Standard aluminum dome cap
  3. Aluminum Handrail Turndown cap (Can be used at either end of the handrail)
  4. Standard brass dome cap
  5. 90 degree, brass end cap
  6. Brass scroll end cap

• (click to enlarge)
  1. Standard vinyl column cap
  2. Standard, continuous sleeve column extension top. Seamless welded steel top
  3. Flat wood column cap
  4. Wood Ball column cap
  5. Brass ball and wood column cap
  6. Brass ball column cap
  7. Small cast iron pineapple column cap
  8. Large cast iron pineapple column cap
  9. Solid wood center column base plate cover. Used when the center column is mounted on top of a finished floor.
  (Fixtures are available in oak, maple, cherry, mahogany, and cedar. Additional species available upon request.)

[back to top]

• Another consideration when purchasing a stair is the enclosure railing. This railing is intended to protect people from falling off a balcony or through a stair well. Although you may choose a stair with a wide baluster spacing, the balusters on the enclosure railing are spaced at 4″ or less, which is what the national building code requires.

• With optional Wood railClassic Style Railing
  Classic Style Railing

  Standard height is 36″ tall with 42″ tall available as a special order. Straight and curved sections available. Strong 1″ x 1″ steel Frame. Round steel balusters that match the balusters on the stair. This railing system is pre-welded to the required lengths. Optional, matching railing tops.

  1 1/2″ Round, Steel Top

  1 1/2″ Round, Solid Polished Brass Top

  1 3/4″ x 2″ Standard

  1 3/4″ x 3″ Standard

  1 3/4″ x 3″ Bead & Finger Groove

• Designer Style Railing(click image above to enlarge)
  Designer Style Railing

  Standard height is 36″ tall with 42″ tall available as a special order. Straight and curved sections available. Six optional parts make up this system.

  1. Optional Wood Handrail Top Railing

  1 3/4″ x 2″ Standard

  1 3/4″ x 3″ Standard

  1 3/4″ x 3″ Bead

  2. Optional Baluster Type and Finger Groove

  1″ Round Steel Baluster

  1″ Round Wood Baluster Choices

  3. Wood Bottom Shoe that trims the floor.
  4. Wood Corner & Loft Posts
  5. Wood Wall Posts
  6. Wood Loft face trim

[back to top]